Product Overview

HP - 200HP through 500HP
Speed - 1800, 1200, 900 RPM
Voltage - 460V, 575V
Frequency - 60 Hz

Motor Type - AEEAGD

The TECO-Westinghouse MAX-HT motor is specifically designed to meet the demanding requirements of the toughest crusher applications. These motors are designed for vertical or horizontal mounting. Starting and breakdown torque exceeds NEMA Design “C” requirements.

Design Features

• Premium efficiency design
• Suitable for across the line and wye - delta starting
• NEMA Design C torque’s
• Class F insulation
• Moisture resistant copper windings with 2dip and bake cycles using high quality epoxy resin and an enamel top coat for abrasion resistance
• Thermal protection (thermistors, one per phase)
• Squirrel-cage, aluminum conductor with end-ring and wafer blades integrally cast rotor for all frame sizes (F#5007-5808)
• IP55 enclosure
• Bi-directional rotation
• Cast iron construction on frame and end brackets
• Lightweight rolled steel fan cover
• Oversized roller bearing for belt drive applications
• Shaft V-ring seal on both ends (provisions required for INPRO SEAL modification as option)
• Two threaded drain holes with one-way breather (horizontal applications)
• Locknut and washer on ODE for vertical applications (shaft down); drain holes/plugs installed at lowest point on end brackets/both ends
• High strength steel shaft AISI 4140 shaft material
• Radius step-down shaft shoulder to avoid broken shaft
• Polyurethane surface finish paint